The key to uniformity in any Temperature and Humidity Controlled Stability Chamber is the airflow, which ensures all parts of the chamber are constantly supplied with conditioned air at the correct temperature and humidity. The Stability PLUS™ design ensures there are no hot or cold spots anywhere in the chamber, which would destroy the critical balance of temperature and humidity. Also the gentle nature of the airflow ensures that all test areas are fully conditioned, regardless of chamber loading.
The Temperature and Humidity controlled Stability Chambers are constructed from 304 Stainless Steel, with the exterior surface painted as extra protection. The interior is unpainted allowing easy cleaning and draining when used in high humidity conditions. Each unit is supplied with 4 solid stainless steel shelves which locate into 4 pilasters, and these serve to hold the shelves rigid and bear the load of the samples being tested. There are 19 available shelf positions to allow high density testing if required.
Modal | SKSSHC365A | |
Chamber Volume | 33 cu ft 934 Liters | 33 cu ft 934 Liters |
Chamber Dimensions | 33”w x 27”d x 60”h 84cm x 69cm x 152cm | 33”w x 27”d x 60”h 84cm x 69cm x 152cm |
External Dimensions | 41”w x 35”d x 90”h 104cm x 89cm x 229cm | 41”w x 35”d x 90”h 104cm x 89cm x 229cm |
Temperature range | 2°C to 70°C | 35°C to 70°C |
Control Resolution | 0.1°C | 0.1°C |
Humidity range | 20% - 96% RH | 20% - 96% RH |
Control Resolution | 0.1°C | 0.1°C |
Uniformity at 37°C | + 1°C | + 1°C |
Heat-up time: Amb - 37°C | 7 minutes | 7 minutes |
Heat-up time: 10°C - 50°C | 22 minutes | - |
Recovery time at 37°C** | 1.25 minutes | 1.25 minutes |
No. of shelves supplied | 4 | 4 |
Max no. of shelves | 19 | 19 |
Shelf area (each) | 6 sq ft (0.5 sq M) | 6 sq ft (0.5 sq M) |
Electrical Services | 220V, 1Ph, 50/60Hz 2.0kW, 16A | 220V, 1Ph, 50/60Hz 2.0kW, 16A |
Shipping Weight | 1,600 lbs; 727 Kg | 1,200 lbs; 545 Kg |